| 1. | Study on plastic deformation resistance of sn - pb - re solder
钎料的塑性变形抗力研究 |
| 2. | Experimental study of deformation resistance of trip800 steel
800钢变形抗力的试验研究 |
| 3. | Property improvements of thermal - deformation resistance of polyurethane elastomers
聚氨酯弹性体耐热形变性能的改善 |
| 4. | Aerospace series - cables , electrical , aircraft use - test methods - deformation resistance installation with plastic cable ties
航空航天系列.飞行器用电缆.试验方法.耐变形 |
| 5. | The model of the deformation resistance of weathering steel is calculated by measured value and it has higher fitting precision
用实测值回归出了耐候钢的新型变形抗力模型，而且该模型具有较高的拟合精度。 |
| 6. | Characteristics : this product , designed to locate the hole of the board in hole drilling , features good crimple resistance , heat resistance , burning resistance and deformation resistance
本产品用于钻孔时对板的孔用，有一定的抗皱，抗热性，不易变形，不易烧焦等特点。 |
| 7. | The results show that the deformation resistance is affected remarkably by both strain rate and deformation temperature , the deformation resistance decreases with the increase of temperature , and it increases with the increase of strain rate
结果表明：变形温度和应变速率对耐候钢变形抗力的影响最强烈；耐候钢的变形抗力随变形温度的升高而下降，随应变速率的提高而增大。 |
| 8. | The deformation resistance of the weathering steel during hot deformation has been studied using mms100 - simulator , and the relationship among deformation temperature , strain rate , degree of deformation and deformation resistance has been determined
摘要通过在mms100 - simulator热力模拟实验机上的热压缩实验，研究了不同热变形条件下耐候钢的变形抗力，考察了变形温度、应变速率及变形程度与变形抗力之间的关系。 |
